• 366/427 tall deck engines - Don Terrill’s Speed-Talk 08.12.2019 & 0183;& 32;The 427 is 4.250 bore. I would think that you would be safe up to .060" overbore in that appli ion. Need a tall deck intake manifold or spacers if they still make them. Not sure if i would mess with the 366. Not sure if I would mess with it either way unless you have one ready to go. 454's are still fairly easy to find and would be a much easier fit.

  • 366T/427T engines - Tradecraft Specialties The 366 and 427 tall decks first appeared in 1968, and the last tall deck 427 was cast in 1990. 366 units were cast up until 1992 at GM, and possibly later by aftermarket suppliers like Goodwrench, although we cannot confirm this.

  • Decks Over 6 Feet High – Decks by Size – Hickory Dickory Decks Decks by Size. FILTER RESULTS, 2 Level Decks, 3 Level Decks, 4 Level Decks, Decks Over 6 Feet High, Large Decks, Low To Ground, Mid High Decks, Small

  • Chevrolet big-block engine - Wikipedia The 366 was produced only as a tall-deck engine, with a deck 0.4 in 10 mm taller than the 396, 402, and 454 short-deck Big Blocks. 396 and 402 edit The 396 cu in 6.5 L V8 was introduced in the 1965 Corvette as the L78 option and in the Z16 Chevelle as the L37 option.

  • 366 big block chev The H.A.M.B. 366 and truck 427 have a deck 0.400" taller than the 396, car 427, 454, 502. And a 350 or similar sized small block will weigh less, fit more easily, and make as much power. squirrel , Jan 7, 2008

  • CHEVROLET Melling Oil Pump Driveshafts - Free Shipping on Oil Pump Driveshaft, Steel Sleeve, Chevy, 366/427, Tall Deck, Each Not Yet Reviewed. Part Number: MEL-IS-77B More Detail Estimated Ship Date: Loading Tomorrow Loading $9.68 Cart Multiple Images; Melling IS-55H - Melling Heavy-Duty Intermediate Driveshafts. Compare. Oil Pump Driveshaft, Intermediate, Chevy, Diesel, Each

  • 427talldeck block for sale eBay Thermostat Housing Big Block Chevy Medium Truck Tall Deck 366 427. Pre-Owned. $29.91. From Canada. or Best Offer. Shipping not specified. Watch; 80 81 Chevy GMC truck tall deck block 366 engine parts timing cover gaskets 427. New Other $11.24.

  • Chevy 427 and 366 questions - Coffee Shop - Red Power I believe they were both, "rated" at 200hp. Everything from the 427 should fit right to the 366 . You know these are tall deck engines Don't think I've ever seen a 427 in a truck with a 2bbl. Seen a C-10 pickup with a 454 2bbl. An old Q-jet and a spread bore intake from the junk yard really woke the 454 up.

  • TallDeck427 ??? Any Good ??? - Racingjunk Forums if it is a truck tall deck 427 then you can take and install a 4.25 stroke bbc crank and stock 454 pistons then run a 6.385 rod i think . hopefully someone will correct me if needed. a friend of mine built one with stock .30 over 454 pistons a 4.25 crank and either stock lenth rods or 6.385 rods and it worked great . it save him lots of cash to not have to buy 496 pistons. makes a nice 500

  • Big Block Chevy Tall Deck 427 - YouTube 在必应上点击查看1:2602.09.2016 & 0183;& 32;Tall Deck 427 w/ Mutha Thumpr Cam - Duration: 0:41. Booztech Performance 4,333 views. 0:41. Big Block 427 Tall Deck Gmc 366 big block - Duration: 0:33. bigfr33k 26,156 views. 0:33 . Chevy 427 作者: Reynier Gonzalez

  • Medium Truck 366/427 - The 1947 - Present Chevrolet and … 12.08.2018 & 0183;& 32;The tall deck motors are not a good choice for a light duty truck. The reason they went to tall deck on the 366/427 is to add a 4th piston ring. This increases friction, but allows the engine to be operated at continuous WOT in the large trucks it was designed for. The taller deck also moves the exhuast manifolds up and out causing frame interference in some cases. Also requires a special …

  • Chevy Tall Deck 366 Rebuilt - YouTube 1976 Chevrolet C 65 Single Axle Strht Truck V8 Gas Engine 366 / 427 Family 5 X 2 Transmission Ch - Duration: 5:19. Big Block Chevy Tall Deck 427 - Duration: 1:26. Reynier Gonzalez 8,218 views.

  • Historical Review of the Big-Block Chevrolet - The The 366, 396, 402, 427, and 427 tall deck engines all used the 3.76-inch stroke crankshaft. The 454 and 502 use the 4.00-inch stroke crankshaft. The 496 Gen VII and the 572 Gen VI use a 4.375-inch stroke crankshaft. Chevrolet installed nodular castiron and forged-steel crankshafts in its big-blocks. The nodular cast-iron crank was installed in

  • 366 Engine? - Off-Road Forums & Discussion Groups The 366 block is known as a tall big block. The reason for the tall big block is due to the pistons used in truck engines. The truck tall big block engine uses 4 rings on the piston so the deck height is about .250" taller than the passenger/light truck big block. The tall-deck 427 is much sought after for performance buildups though. Buddy

  • 366 big block? NastyZ28.com you could build up a 427 with that crank if you could find a 427/454 block. can't bore that one to make a 4.250 bore. to thin,, or through to water if you try. you'd have to balance the assy though. it's balanced for the 366 piston weight. i think that is also a tall deck truck block if i remember correctly.

  • 366 Engines For Sale - New Used & Aftermarket. 1 - 1 2We have 12 366 Engines for sale. Search our listings for new used & aftermarket semi trucks parts & accessories, updated daily from 100's of dealers & private sellers. 1 - 12

  • chevrolet big block cylinder head bolts ,flywheel bolts with two different deck height one for cars and light trucks and one of heavy duty use that was .400 taller the 366 only came as a tall deck but both 427 and 454 came both ways . Only using two stoke combinations 366,396,402 and 427 used the shorter stroke of 3.760. 454 engines came with a longer stoke of 4.00 inches

  • How to identify Big Block Chevy truck Snowplow Forums 25.12.2004 & 0183;& 32;Tall deck big blocks were exclusively used in medium duty and larger trucks. All 366's are tall deck. 427's were never available in a light truck but were certainly famous in Corvettes, Impalas and special order muscle cars of the mid-late '60's.

  • TallDeck Distributor For Your Chevy From Performance The Chevy Tall Block D.U.I. is an excellent choice for the original 348-409-427-454 Tall Block engines produced from 1958-’65. It is also a great bolt-on for both the ZZ-572 620 HP & ZZ-572 720 HP Crate Engines, both which have Tall Deck Big Blocks.

  • 366/427 tall deck GM Engines - Coffee Shop - Red Power 07.11.2010 & 0183;& 32;366/427 tall deck GM Engines Archived. This topic is now archived and is closed to further replies. 366/427 tall deck GM Engines. By TP I did some internet searches but didn't find much for those tall deck engines. Anyone know if you can get them. Thought about doing it over the winter. Hopefully it will keep running for awhile yet. We just bought a old 379 Pete, got a dump trailer rented We got a super nice C6500 Chevy 10 wheeler at the farm. Its a really nice, tight old truck Only trouble is the 366 under the hood is smo Are you leaning towards a GM short block, or a short block from some engine rebilding outfit? Been a while, but I remember an outfit called Gopher In this age of emission controls I would be very hesitant to rebuild a GM 366. Not sure about your rules but in Ontario they have to be leaned down Tyler, What about adapting a Cummins like that special pickup truck you have? Well, if it was mine I would go diesel, but the guy I am working for isn't as interested in Custom setups and prefers to keep things bland, aka sto 3406 in a Chevy would make a helluva truck I can't say for certain but I'd have to believe the bell housings are same as everything else Chevy V8 .Well, don't know .GMC's V6's were different from the v8's and I-6's.bolt pattern on blocks on 454/427 same,flywheels are different,one internaly balanced,other is externaly balanced. check with gm or jasper,new or r Hmmmm, I didn't know that Ya learn something every day. daveThe 427 will give a lot more hp. you will climb the hill two gears higher than a 366. I'm thinking you can still get a new GM engine and they not a

  • 427 Tall Deck Pros and Cons? - The Stovebolt Forums 2007-01-27 & 0183;& 32;Only amde in the 366 and 427 cid, no 396, 402, or 454. GM did make a few 500 cid crate engines based on that block, also the DRCE pro stock block is based on it. The only real pro to using the tall deck on a street engine would be if you're going for big cubes 600 , otherwise, it's just extra weight.

  • chevy 366 big block PlowSite 2003-09-09 & 0183;& 32;366 tall deck block is usefull for 1 thing IMO and that is to rob the steel crank and the steel 4 bolt caps. Well if it is running it makes something deccent to move things around but I wouldnt ever put omoney into one a 366 is a 3.76" stroke. just like the 396 402 427 and a tall deck 427 …

  • 429 Electric/Lighted Adjustable BIG 6′ – OR Specific Inc. Aug 28, 20 9 427 Standard 4′ · 428 Standard 5′ · 429 Standard 6′ · 427-ADJ Adjustable 4′ · 428-ADJ Adjustable 5′ · 429-ADJ Adjustable 6′ · 427-L

  • What Replacement Carb For A 366 - 2000-2014 Silverado The 366 and 427 are externally identical, both using the same crankshaft with internal balancing and both being tall deck. The 454 is a bit more work. I think the biggest problem is the flywheel. I remember a guy who dumped a 454 in 3 ton and had to take his existing flywheel in and have the 454 weights attached as the flywheel/clutch on the

  • WTF a GM 366 ???? pic Pirate 4x4 The 366 is a very small bore BBC. Stroke is the same as a 396, 402, or 427, but not a 454 as it is longer stroke and is externally balanced like a 400sbc. It has 3 compression rings, therefore the need for a tall deck. Also it has peanut port heads that are smaller in cc intake runners compared to your normal oval port heads.

  • what is the difference between a tall deck 427 chev. and a 05.04.2016 & 0183;& 32;Nowdays, tall decks are not such bastard pieces like they used to be 10-15 years ago. Lots of off the shelf parts for them today. Not as much as std deck but about anything you want is out there if you look a little.. Just make sure it is a 427 and not a 366.

  • 427 tall deck block for sale eBay Thermostat Housing Big Block Chevy Medium Truck Tall Deck 366 427. Pre-Owned. $29.91. From Canada. or Best Offer. Shipping not specified. Watch; 80 81 Chevy GMC truck tall deck block 366 engine parts timing cover gaskets 427. New Other $11.24. Was: Previous Price $14.99

  • building a TALL DECK 496 stroke BBC - Gen I & II Chevy V8 I ran accross this post over a year ago after Ipicked up a 1978 427 tall deck truck block and I based my build off of it. 1978 Tall Deck 427 truck block Casting 364776 Callies Compstar H beam rods Part Number CSB6800 ES3BP42BDS, Length 6.800 0.665 over stock Callies Dragonslayer Part Number BBP42B-DS, 4.250 Stroke 0.250 over stock

  • GMC CHEVROLET 366 427 TALL DECK TRUCK BBC INTAKE MANIFOLD GMC CHEVROLET 366 427 TALL DECK TRUCK BBC INTAKE MANIFOLD 3917225 C 29 72. Sign in to check out Check out as guest . Add to cart . Add to Watchlist Unwatch. 1-year protection plan from SquareTrade - $48.99 1-year protection plan from SquareTrade - $48.99 Opens an information Overlay. 10

  • 366 gas engine Page 2 Arboristsite.com I can help with this - been there done the research. Yes both big block tall deck motors. The link above is a ripoff. i priced a 366 from jasper for like 1600 and change long block , the 427 is like 3600 and change. Same intake and TBI. Computer is an easy ten miniute swap. My bucket has the 366 cuz SM are a bunch of cheap :censored:.

  • Chevrolet big-block engine - Wikipedia 2020-08-02 & 0183;& 32;The 366 was produced only as a tall-deck engine, with a deck 0.4 in 10 mm taller than the 396, 402, and 454 short-deck Big Blocks. 396 and 402 edit The 396 cu in 6.5 L V8 was introduced in the 1965 Corvette as the L78 option and in the Z16 Chevelle as the L37 option.

  • big block info.? - 366 crank in 454 block- piston required The 366 crank is a forged, Tufftrided crank. Just be sure to have it balanced, as the 366/427 truck tall deck motors had 4 rings on the pistons. The tall deck rods have alittle more meat around the bolts also. If possible, I would also grab the 4 bolt main caps just in case. Virgil

  • can someone explain tall vs short deck BBC? Team … 2010-01-11 & 0183;& 32;A quich visual on the difference,The standard deck is flush with the top of the water pump.With a tall deck the distance between the top of the water pump and the deck will be about the same as the thickness of a 3/8" bolt. With modern "3D" profiled steel connecting rods,you can probably squeeze a 4.5" stroke crank into a 427 tall deck truck block.The tall deck 427 isnt notoriously thick …

  • 366TallDeck NastyZ28.com The fit of the tall deck because of it's size is usually not an issue,as it is about 1/2" taller and 3/8" wider in each direction then a regualr deck block. Not exactly a big difference. With cheap headers it should be a non issue. The 366 has been used by "urban" type racers over the years for some low buck money makin fun.

  • CHEVROLET 6.0L/366 Distributors - Free Shipping on Orders Distributors, EFI Dual-Sync, Hall Effect, Computer-controlled Advance, Male/HEI, Steel Gear, Black Cap, Black Housing, Tall Deck, Chevy, 366, 427 Not Yet Reviewed Part Number: HLY-565-204BK More Detail

  • 366tall block Pirate 4x4 Its a tall deck. It will have a decent 7/16ths truck rod probably and a good steel 396-427 crank. pull the crank and rods out of it and buy a 454 block. build a 427 and have a good running motor. why have a 750 lb 366 inch big block with junk heads when you can have a 550 lb 406" small block. Unless you go 427 or bigger the weight isnt worth it.

  • can someone explain tall vs short deck BBC? Team Camaro Tech - Tall deck blocks use a special intake manifold and distributor to allow for the additional height. Other than that many parts can be the same as a standard deck. - The 'stroke' of a standard and a 'tall-deck' 427 are the same, only difference is the piston.

  • How to Identify a 427 Chevy Engine It Still Runs The Chevrolet big-block 427-cubic-inch engine was available on some Corvettes, Camaros and full-size Chevrolet Cars produced from 1966 to 1969, when the engine was replaced with the 454. The 427 engine is a variation of the Chevrolet Mark IV big-block engine family and can appear outwardly similar to other engines in

  • COMP Cams 7964- 6: Hi-Tech Pushrod Set Chevy 366-427ci Truck Hi-Tech Pushrod Set; Chevy 366-427ci Truck and Marine Tall Deck; 3/8& 39;& 39; Diameter; 8.680& 39;& 39; Intake; 9.650& 39;& 39; Exhaust Tall Deck Stock Length ; End Type: D-D; 6/pkg.

  • clues for tough 427 tall deck? - Chevy Message Forum - … 2012-05-02 & 0183;& 32;the tall deck 427 block you have is a good place to start from, the heads are far less desirable, most Seven Trust building the tall deck blocks build a 496 stroker with a longer 6.385" connecting rod, and 4.25" stroker crank, and much lighter forged pistons,to take full advantage of the taller deck height, the current pistons are far too heavy to make high rpm power, the tall deck block used a heavy

  • Horsepower on a 366 big block? - Answers The firing order of the Chevy 366 big block truck engine is 1-8-4-3-6-5-7-2 Rotor turns clockwise. Click the link and you will see a diagram of a 1982 Chevy 350 V8 which is exactly the same as the

  • Bunnings Warehouse Australia's Biggest DIY, Garden & Hardware Store Serene Bathroom View all Bathroom Inspiration Bathroom Showers 366 Bathroom Tapware 653 Vanities and Mirrors 416 Toilets 281 310 Romak Compact Garage Workbench $ 89 Ultimate Storage Tall Cabinet $ 449 Qiq Fix Galvanised Metal Two Door

  • Historical Review of the Big-Block Chevrolet - The Complete History The factory offerings of the Mark IV were 366-, 396-, 402-, 427-, and 454-ci The 366, 396, 402, 427, and 427 tall deck engines all used the 3.76-inch stroke

  • 366 tall deck - Off-Road Forums and Discussion Groups 2003-05-04 & 0183;& 32;Re: 366 tall deck When I was in CO, there was a guy at the jobsite I worked at that had a 366 in a 3/4 ton 4x4. Asked him how it was, and said it isn't a high rpm motor, but it was a stump puller.

  • BBC Tall Deck Vs. Short Deck Good Vs. Bad - Racingjunk Forums i believe most if not all the tall deck 366 and 427 bbc were truck appli ions-ive read typically the bores are thicker which ive heard being able to go up to .125 overbore safely. anything over .060 i would double check with a sonic test so keep in mind that fact.im not sure how big a stroke crank you can put in but id venture to say 4.375 or even 4.5 may fit.i built a 10.2 deck dart block

  • 366 big block? NastyZ28.com 2008-08-22 & 0183;& 32;you could build up a 427 with that crank if you could find a 427/454 block. can't bore that one to make a 4.250 bore. to thin,, or through to water if you try. you'd have to balance the assy though. it's balanced for the 366 piston weight. i think that is also a tall deck truck block if i remember correctly.

  • 427TallDeck Pros and Cons? - The Stovebolt Forums Only amde in the 366 and 427 cid, no 396, 402, or 454. GM did make a few 500 cid crate engines based on that block, also the DRCE pro stock block is based on it. The only real pro to using the tall deck on a street engine would be if you're going for big cubes 600 , otherwise, it's just extra weight.

  • Chevrolet big-block engine - Wikipedia The Chevrolet "Big Block" is a term for a series of large displacement V8 engines that have Heads used on the high performance 409 and 427 engines had larger ports and valves than The 366 was produced only as a tall-deck engine, with a deck 0.4 in 0 mm taller than the 396, 402, and 454 short-deck Big Blocks.

  • clues for tough 427 tall deck? - Chevy Message Forum 07-04-11 04:59 AM - Post 2110391 In response to docpete the tall deck 427 block you have is a good place to start from, the heads are far less desirable, most Seven Trust building the tall deck blocks build a 496 stroker with a longer 6.385" connecting rod, and 4.25" stroker crank, and much lighter forged pistons,to take full advantage of the taller deck height, the current pistons are far too heavy

  • 366 GM truck motor Heavy Equipment Forums From what I have heard, GM quit making any more 427 Tall Deck replacement engines, but are still selling the 366. I am always of the idea that if I can put a bigger engine in it without changing any major parts along the way, I go for it. I like the idea of dropping a 427 in it. I think that is exactly the way I would go.

  • Browse - Casting Numbers .info: engine blocks, heads, and more 338 results Notes: 454, 4 bolt, Bowtie, MkIV, 9.8 deck, cheapesed bores, 4.25-4.50 Notes: 427 tall deck, 4 bolt, Generation VI, 4.250 bore, fuel pump boss, clutch

  • Chevy Tall Deck 366 Rebuilt - YouTube 在必应上点击查看2:2806.07.2015 & 0183;& 32;1976 Chevrolet C 65 Single Axle Strht Truck V8 Gas Engine 366 / 427 Family 5 X 2 Transmission Ch - Duration: 5:19. Big Block Chevy Tall Deck 427 - Duration: 1:26. Reynier Gonzalez 8,218 作者: Michael Warfield

  • Chevy 427 and 366 questions - Coffee Shop - Red Power 04.11.2009 & 0183;& 32;The two engine have the same bore. The 427 has longer stroke, that will give you more lugging power and start a load easyer. If you think about the 366 is not much more than a 350. If I remember right the 427 has about 25 or 30 horse over the 366. I have run both and the 366 is a dog after running a 427.

  • what is the difference between a tall deck 427 chev. and a … 2016-04-05 & 0183;& 32;Hey Seven Trust, I would like to know the difference between a tall deck 427 big block Chev and a regular block 427 Chev. What are the pros and cons of each. I would also appreciate any opinions positive and negative on these engines. I found a good running tall deck engine I am thinking on putting in one of the projects I have going right now.

  • 427talldeck bbc - YouTube 366 BBC in a 85 c 10 - Duration: 1:34. David Balderston 7,558 views. 1:57. Big Block 427 Tall Deck - Chevy Silverado - Duration: 0:30. Reynier Gonzalez 2,654 views. 0:30. 1969 Chevy 427 Dyno

  • 366 BB Truck motor - Chevy Message Forum - Restoration and most 366 blocks will easily bore to fit a 396 bore size, a few the 402 bore size pistons and you can swap to 6.386" rods to match the taller deck height. Ive had several in my shop, I gladly took the cranks, dampers, rods, heads, valve covers, oil pans, etc. and just gave the blocks away, but if you get a tall deck 427 they make a great base

  • For Sale by Owner - 1967 Corvette 427 3x2, 1957 Bel Air 2dr Hard Top, 1970 Torino Cobra 429 SCJ, 1967 Chevelle SS396 1966 67 366 tall truck 3916319 1968 85 366 talltruck 3916321 1968 427 385, 390, 400, 425, 430, 435, 2 and 4 350, 375, 2 and 4 bolt 3937724 1968 85 366 tall truck 39377261968 84 427 tall truck 3955270 1969 427 335, 390, 400, 350, 375, 2 and 4 bolt 3955274 1968 85 366 tall truck 3955276 1968 84 427 talltruck 3963512 1969 71 427 335, 390,

  • I've got a 366 Chevy that was supposed to be a 427 but The 366 and 427 use the same stroke, but the 427 has a much larger bore. The 366 is a tall deck truck engine and as such will use a different intake manifold. You would be better off getting a 427 if that is what you want. The heads and crankshaft will interchange with the 427.

  • 366T/427T engines - Tradecraft Specialties Below is a list of factory appli ions for the 366 and 427 tall deck engines, based on research to the best of our ability, so errors may occur. The 366 and 427 tall decks first appeared in 1968, and the last tall deck 427 was cast in 1990. 366 units were cast up until 1992 at GM, and possibly later by aftermarket suppliers like Goodwrench

  • Tall Order 87 V2 Frame - Gloss Black – Tall Order BMX The new 87 V2 features the addition of a logo embossed external gusset on the top tube for increased strength. If you are looking for a frame to help you learn

  • chevy 366 big block PlowSite 366talldeck block is usefull for 1 thing IMO and that is to rob the steel crank and the steel 4 bolt caps. Well if it is running it makes something deccent to move things around but I wouldnt ever put omoney into one a 366 is a 3.76" stroke. just like the 396 402 427 and a tall deck 427 a 454 is a 4" stroke. The mains are the same on all of them.

  • what is the difference between a tall deck 427 chev. and a The tall deck truck motors have a taller piston with 4 rings instead of 3 like the short deck ones, thus a .4 inch taller deck. That is where the .4 inch longer rods all the aftermarket makers sell started from, so you couild use a short deck piston in a tall deck block.

  • 366/427talldeck GM Engines - Coffee Shop - Red Power 366/427talldeck GM Engines Archived. This topic is now archived and is closed to further replies. 366/427 tall deck GM Engines. By TP from Central PA, November 4, 2010 in Coffee Shop. Start new topic; Recommended Posts. TP from Central PA 1,781 TP from Central PA 1,781 Advanced Member; Members; 1,781 10,049 posts

  • 1969 C50, HEI distributor upgrade. - The Stovebolt Forums If so, just take a screwdriver and turn the pump drive to line up with the distributor when you drop it in. Do you have a pic of the engine? That will clear up a lot of questions. Also the 366/427 tall decks have a longer distributor shaft to make up the difference in the deck dimensions. Good luck. SimS

  • Big Block Chevy 366 396 402 427 454 - Hot Rod Reference 427 1974-1976: Four-bolt tall-deck 364776: 454 1977-1990: Four-bolt tall-deck 364779: 366 1968-1990: Four-bolt tall-deck 473478: 427 1977-1990: Four-bolt tall-deck 1014183: 366 1991-1992: Four-bolt tall-deck 3855961: 396: 325 and 360: 1966: Two-bolt: 3855962: 396: 360, 375, and 425: 1965-1066: Two-bolt or four-bolt: 3869942: 427: 390